Firestik Co-Phase PL-259 Coax Connector

Firestik Co-Phase PL-259 Coax Connector

Be the first to review this product


Quick Overview

Up until now, when you wanted to build a co-phase harness you would use a PL-259 without an insert. It got the job done but you would end up with a lot of slop between the coax and the connector. That was then ... this is now! This special (and hard to find) PL-259 connector is made for nothing else but co-phase harnesses.

Double click on above image to view full picture

Zoom Out
Zoom In

More Views


It has two holes in the base for inserting each piece of coax. There are soldering access holes on the side for making that all important connection and the tip uses the regular soldering procedure. The CP-259 is without a doubt the best solution when it comes to repairing or building co-phase harnesses.

Additional Information

Manufacturer Firestik
Weight 1.0000